Hughes DIRECWAY DW4020 - Manual (Page 49)

Chapter 3 • The User Interface
1031484-0001 Revision 2
37
If there is a problem with any of these four status elements, a red
exclamation mark will appear in the status field. In addition, if
there is a problem with the
Transmit Status or Receive Status , an
error message and an error code will appear in blue. You can click
on the error message and an explanation of the error condition
and what action might solve it will appear. See Figure 35. The
tables below provide a more detailed explanation of status codes,
error messages, and corrective actions.
Transmit Status messages The following messages may appear in the Transmit Status field.
The Comments section gives more information about each code,
and describes any possible corrective measures. See Figure 36 on
page 41 for corrective measure involving cables or the power
supply. Power cycling means to unplug the power cord from the
wall outlet or surge protector, wait 10 seconds, and plug it back
in.
Figure 35: On-line help for status messages