HONDA 2010 Accord Coupe - Manual (Page 126)

Turn this dial to increase or decrease
the fan speed and airflow.
Turning this dial clockwise increases
the temperature of the airflow.
This button turns the air
conditioning on and off. The
indicator in the button is on when
the A/C is on.
The system automatically
turns on the A/C and switches to
recirculation mode (see page
to
use this setting). Air flows from the
center and side vents in the
dashboard. Pressing the
, A/C,
or any of the mode buttons cancels
MAX A/C, but the A/C stays on.
When the recirculation indicator is
on, air from the vehicle’s interior is
sent throughout the system again.
When the indicator is off, air is
brought in from the outside of the
vehicle (fresh air mode).
The outside air intakes for the
heating and cooling system are at
the base of the windshield. Keep this
area clear of leaves and other debris.
The system should be left in fresh
air mode under almost all conditions.
Keeping the system in recirculation
mode, particularly with the A/C off,
can cause the windows to fog up.
Switch to recirculation mode when
driving through dusty or smoky
conditions, then return to fresh air
mode.
This button turns the rear window
defogger on and off (see page
).
Airflow is divided between
the vents in the dashboard and the
floor vents.
Air flows from the center
and corner vents in the dashboard.
Use the mode control buttons to
select the vents air flows from. Some
air will flow from the dashboard
corner vents in all modes.
Pushing this button also turns the
power mirror heaters on and off.
/
75
125
CONTINUED
Except U.S. LX and LX-S
Vents, Heating, and A/C
Fan Control
Temperature Control
Air Conditioning (A/C) Button
MAX A/C Button
Recirculation Button Rear Window Def ogger
Button
Mode Control
Fe
a
tu
re
s
123
09/06/25 19:47:32 31TE0620_128
2010 Accord Coupe