Vents, heating, and a/c – HONDA 2010 Accord Coupe User Manual

Page 129

Advertising
background image

To remove fog from the inside of the
windows:

Turning the fan speed control dial all
the way to the left shuts the system
off.

Keep the system off for short
periods only.

To keep stale air and mustiness
from collecting, you should have
the fan running at all times.

When you switch to

, from

or

, the A/C stays on.

This helps prevent the windows from
rapidly fogging up when the air is
suddenly routed away from the
windshield. If you want to turn the
A/C off, press and release the A/C
button twice. The indicator in the
button comes on and then goes off.

Select

. The system

automatically switches to fresh air
mode and turns on the A/C.
The A/C indicator does not come
on if it was off to start with.
Select

.

Set the fan and temperature
controls to maximum level.

For your safety, make sure you have
a clear view through all the windows
before driving.

To clear the windows faster, you can
close the dashboard corner vents by
rotating the wheel below each vent.
This sends more warm air to the
windshield defroster vents. Once the
windshield is clear, select fresh air
mode to avoid fogging the windows.

Set the fan to the desired speed, or
high for faster defrosting.
Select

. The system

automatically switches to fresh air
mode and turns on the A/C. The
A/C indicator will not come on if it
was off to start with.
Adjust the temperature so the
airflow feels warm.
Select

/

to help

clear the rear window.
To increase airflow to the
windshield, close the corner vents.

1.

2.
3.

1.

2.

3.

4.

5.

To Def og and Def rost

To Turn Everything Of f

To Remove Exterior Frost or Ice
From the Windows

Vents, Heating, and A/C

126

09/06/25 19:48:25 31TE0620_131

2010 Accord Coupe

Advertising
This manual is related to the following products: