HONDA 2010 Accord Coupe - Manual (Page 314)

Pour the fluid into the filler hole
slowly and carefully so you do not
spill any. Clean up any spills
immediately; it could damage
components in the engine
compartment. If Honda MTF is not available, you
may use an SAE 10W-30 or 10W-40
viscosity motor oil with the API
Certification Seal that says ‘‘FOR
GASOLINE ENGINES’’ as a
temporary replacement. However,
motor oil does not contain the proper
additives, and continued use can
cause stiffer shifting. Replace as
soon as it is convenient.
The transmission should be drained
and refilled with new fluid according
to the maintenance minder (see page
).
If you are not sure how to check and
add fluid, contact your dealer.
Let the fluid run out until it stops,
then reinstall the check bolt and the
filler bolt.
Reinstall the under cover and put the
holding clips back in place. Make
sure the under cover is installed
under the edge of the front bumper.
291
Transmission Fluid
Ma
int
e
na
nce
311
09/06/25 20:21:22 31TE0620_316
2010 Accord Coupe