HONDA 2010 Accord Coupe - Manual (Page 347)

Take the jack out of the tool kit
case. Loosen each wheel nut 1/2 turn
with the wheel nut wrench. Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch. 6. 7. 8.
Changing a Flat Tire
344
JACKING POINT
JACK WHEEL NUT
09/06/25 20:26:51 31TE0620_349
2010 Accord Coupe