HONDA 2010 Accord Coupe - Manual (Page 86)

Push and hold the front of the
master door lock switch on the
driver’s door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
Release the switch, and within 5
seconds, turn the ignition switch
to the LOCK (0) position. Release the switch, and within 5
seconds, turn the ignition switch
to the ACCESSORY (I) position.
move the shift
lever to the Park (P) position.
Push and hold the front of the
master door lock switch on the
driver’s door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
Make sure the shift lever is in the
Park (P) position (A/T vehicles).
Turn the ignition switch to the ON
(II) position, and make sure to
close the driver’s door.
push and hold the
brake pedal, and move the shift
lever out of the Park (P) position.
Turn the ignition switch to the
LOCK (0) position.
1.
2.
3.
4.
5.
6.
3.
4.
On A/T vehicles,
On A/T vehicles,
Locks both doors when the vehicle’s
speed reaches about 9 mph (15 km/h).
To program the Drive Lock mode:
Door Locks
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
83
09/06/25 19:41:04 31TE0620_088
2010 Accord Coupe