HONDA 2010 Accord Coupe - Manual (Page 132)

When you set the temperature to its
lower limit (
) or its upper limit
( ), the system runs at full
cooling or heating only. It does not
regulate the interior temperature.
When you adjust a fan control, the
fan is taken out of AUTO mode.
In AUTO mode, the vehicle’s interior
temperature is independently
regulated for the driver and front
passenger according to each
adjusted temperature. The system
also regulates each temperature
based on the information of the sun
light sensor and the sun’s position
which is updated automatically by
the navigation’s global positioning
system (GPS). If one side of the
vehicle is getting too much sun, the
system lowers the temperature only
on that side.
When you press this button, the
indicator in the button comes on, and
the passenger’s side temperature is
synchronized to the driver’s side set
temperature. Changing the
passenger’s side temperature makes
the indicator go off and takes the
system out of SYNC mode.
Each time you press this button, the
climate control system switches
between on and off. Turning on the
system with this button selects your
last climate control selection.
To turn the system completely off,
press the ON/OFF button.
Keep the system completely off
for short periods only.
To keep stale air and mustiness
from collecting, you should have
the fan running at all times.
On models with navigation system
Climate Control System
To Turn Everything Of f SYNC Button
ON/OFF Button
Fe
a
tu
re
s
129
09/06/25 19:48:58 31TE0620_134
2010 Accord Coupe