HONDA 2010 Accord Coupe - Manual (Page 322)

Install the new bulb and turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
Reinstall the coolant reserve tank.
To change the bulb on the driver’s
side, start the engine, turn the
steering wheel all the way to the
right, then turn off the engine. To
change the bulb on the passenger’s
side, turn the steering wheel to the
left.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Use a flat-tip screwdriver to
remove the two holding clips from
the inner fender.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Pull the burned out bulb straight
out of its socket.
Push the new bulb straight into
the socket until it bottoms.
6.
1.
7.
5.
4.
2.
3.
4.
CONTINUED
Passenger’s side
Lights
Replacing a Front Side Marker
Light Bulb
Ma
int
e
na
nce
319
HOLDING CLIPS
BULB
09/06/25 20:22:52 31TE0620_324
2010 Accord Coupe