HONDA 2010 Accord Coupe - Manual (Page 330)

Pivot the blade assembly toward
the wiper arm until it releases
from the wiper arm.
When replacing a wiper blade,
make sure not to drop the wiper
blade or wiper arm down on the
windshield.
Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
Remove the blade from its holder
by grabbing the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder.
Make sure the two rubber tabs
inside the blade fit to each notch of
the reinforcement, as shown.
3.
4.
CONTINUED
Wiper Blades
Ma
int
e
na
nce
327
WIPER ARM BLADE
TOP
BLADE
REINFORCEMENT
09/06/25 20:24:14 31TE0620_332
2010 Accord Coupe