Honeywell HEGS5001 - Manual (Page 47)

5.2.13.1 Programming/Editing/Deleting Privacy Zones, Sony Camera, Continued
a. Press the + or – key until the desired character is displayed on the LCD screen,
and then press Character Select (
ABC
). The controller sends the character to
the KD6/HD6.
b. Continue selecting characters and press Character Select (
ABC
) until all the
characters in the password have been sent to the KD6/HD6. The characters will
appear as astericks (*) on the monitor display for security purposes.
c. Press Enter ( ).
9. Enter the desired privacy number (0-9) to program.
10. Press Enter ( ).
11. Enter the Privacy title (up to 24 characters)
a. Press the + or – key until the desired character is displayed on the LCD screen,
and then press Character Select (
ABC
). The controller sends the character to
the KD6/HD6.
b. Continue selecting characters and press Character Select (
ABC
) until the
desired title is displayed on the monitor.
c. Press Enter ( ).
The following options are displayed on the monitor:
E to Edit the Title Press + or – key until E is displayed on LCD and
press Char Select. Repeat step 10.
D to Delete Zone Coordinates Press + or – key until D is displayed on LCD and
press Char Select. The coordinates for the
Privacy # entered in step 9 is deleted.
S to Program Zone Coord. Press + or – until S is displayed on LCD and
press Char Select. Refer to the instructions
below in step 12.
N to Save privacy title only Press + or – key until N is displayed on LCD and
press Char Select. This option is used for
renaming Privacy Zone Titles. The title only
entered in step 11 is saved for the Privacy #
entered. The programmed privacy coordinates
are not changed.
Rev. 1.01
37 900.0800
19-Jun-06