Hitachi Koki USA Hi-35pc - Manual (Page 15)

1-7
B
ef
o
re
U
sin
g th
e Prin
ter C
o
n
tr
o
ll
er
Chapter 1
3. Connecting the Printer Controller
Connecting the Printer Controller
The printer controller is mounted on the rear of the machine. The installation
procedures are to be performed by the service personnel.
The printer controller is connected to the machine with the engine interface cable
and to the computer with a printer cable or network cable. Power to the printer
controller is supplied from the machine.
NOTE
Do not connect any peripheral devices to the engine interface cable that is used
to connect the printer controller to the machine.
TIP
If you cannot print from your computer, check that the engine interface cable and
printer cable are connected to the corresponding connectors.
4608O016AA
win.book Page 7 Wednesday, January 26, 2000 11:31 AM