Hitachi Koki USA Hi-35pc - Manual (Page 76)

3. "Paper" Property Sheet
3-8
Pr
o
p
ert
y Sheet
Chapter 3
TIPS
• When the machine is equipped with a Shift Tray, or if "Elevator Tray" is
selected when the machine is equipped with a Finisher or Mailbin Finisher, sets
or stacks are stacked in a sawtooth manner so that each is easy to identify.
• If a Job Tray is mounted, or if none of the finishing options is mounted, sets or
stacks are stacked in a crisscross manner.
• The followings are the minimum requirements for enabling crisscross sorting
with the Collated setting:
The stacks of paper of the same size are loaded in the lengthwise and
crosswise direction.
Staple, Hole-Punch, or Cover is not set.
(7) Machine preview
The machine preview shows the set paper source and exit tray.
For a listing of machine preview formats, see p. A-7.
(8) Hole Punch <when Finisher or Mailbin Finisher is mounted>
Select whether to punch holes in the printed pages.
• None
: Does not punch holes.
• Short Edge : Punches holes along the short edge of the document.
• Long Edge : Punches holes along the long edge of the document.
NOTES
• It is possible that no holes are made depending on the paper size and the
specified hole position. For details, see the Operator’s Manual of the machine.
• Holes may not be punched if Long Edge is selected with manual feed copying.
TIPS
• The number of holes to be made is set with Device Option.
• The print preview displays the positions of the holes to be made.
(9) Staple <when Finisher or Mailbin Finisher is mounted>
Select whether to staple each copy set of the document.
• None : Does not staple the printed pages.
• Corner : Staples each copy set at the upper left corner.
win.book Page 8 Wednesday, January 26, 2000 11:31 AM