Hitachi Koki USA Hi-35pc - Manual (Page 72)

2. "Device Option" Property Sheet
3-4
Pr
o
p
ert
y Sheet
Chapter 3
(3) Finisher
Set the specifications of the finishing option installed on the machine.
Setting values : Not Installed, Job Tray, Shift Tray, Finisher, Mailbin Finisher
NOTE
If Installed Tray has not been properly selected, it may be impossible to select
Finisher properly.
(4) Punch
Set the number of holes to be made in Hole Punch.
Setting values : 4 Holes
NOTE
The setting depends on the capabilities of the Finisher or Mailbin Finisher,
whichever is configured with the system.
(5) Mail Bin Name
If the machine is equipped with a Mailbin Finisher, you can name each bin.
Setting values : 1 to 8 characters
(6) Displays the machine preview that represents the configuration of the machine
and options.
For preview listing, see p. A-7.
(7) User Name
The user name (up to eight characters) set in the printer driver is displayed as
the job user name on the machine’s Touch Panel.
Setting value : 8 characters max.
(8) About...
Click to display the manufacturer and version number of the printer driver.
(9) Restore Defaults
Click to restore all settings to the defaults.
Install Drawer
: Drawer 1,2
Duplex Unit : Not Installed
Finisher : Not Installed
Punch : 4 Holes
Mail Bin Name : Bin 1~Bin 5
win.book Page 4 Wednesday, January 26, 2000 11:31 AM