Hitachi Koki USA Hi-35pc - Manual (Page 159)

1. Troubleshooting
5-7
Ch
a
p
te
r 5
T
roub
le
sh
oot
in
g
Symptom Possible Cause Action
Unable to properly
feed prints out to the
specified port. No prints are fed into the
Elevator Tray or Mailbin1
to 5 if the paper type is
thick paper or OHP
transparencies, or the
paper size is A5 or
smaller. Check the paper type and
paper size.
Paper is not fed from
the specified paper
source. Paper is not be fed from
the specified paper source
if that paper source is
loaded with paper of a
different size and
direction. Load the paper source with
paper of the appropriate size
and in the appropriate
direction.
Watermark is not
printed. Watermark may not be
printed in graphics
applications. No watermark can be printed
in this case.
Unable to print
exactly as set. The paper size, paper
direction, and other
settings made on the
application takes
precedence over those
made in the driver. Make correct settings on the
application.
win.book Page 7 Wednesday, January 26, 2000 11:31 AM