Hitachi Koki USA Hi-35pc - Manual (Page 43)

2. Windows NT4.0
2-25
Ins
ta
llin
g th
e Prin
ter Dr
iver
Cha
p
ter
2
Displaying a Property Sheet
You have two different steps to take to display a property sheet. The contents of a
particular property sheet slightly differ depending on how you access it. Select the
appropriate one according to your need.
(1) To display a property sheet from the printer folder
(2) To display a property sheet from an application menu
Below are the detailed procedures for each approach.
Displaying a Property Sheet from the Printer Folder
1. Click the [Start] button and select "Settings." Then, click "Printers."
2. Click the icon of "Digital Copier 35cpm PCL5e"
<To display the Device Option sheet>
3. Click "Properties" from the [File] menu.
<To display a sheet other than Device Option>
3. Click [Document Defaults...] from the menu that will then appear. This opens
the [Digital Copier 35cpm PCL5e Default].
This method is mainly used when there will be no big changes in the settings once
made, such as [Device Option]. It allows you to set the environment in which you
will use the printer. The settings made through this method are valid in all
applications.
Displaying a Property Sheet from an Application Menu
1. Select [Print...] from the [File] menu of the application.
2. Check that the "Name" of the "Printer" is "Digital Copier 35cpm PCL5e." If "
Digital Copier 35cpm PCL5e" is not selected, click [ ▼ ] and, from the menu
that will then appear, select "Digital Copier 35cpm PCL5e."
3. Click the [Properties] button. This shows the property sheet.
This method allows you to set the number of copies and paper for each document.
The settings made on the property sheet accessed through the application are valid
only for that particular application.
win.book Page 25 Wednesday, January 26, 2000 11:31 AM