Hitachi Koki USA Hi-35pc - Manual (Page 81)

3. "Paper" Property Sheet
3-13
Pr
o
p
ert
y Sheet
Chapter 3
"Security" Dialog Box
This dialog box is used to enter the access number and the password for a Lock Job.
(1) Enter the access number of the job.
Setting value : 0001 to 1000 (4 digits)
(2) Enter the password for the Lock Job.
Setting value : 0000 to 9999 (4 digits)
NOTES
• If the [Cancel] button is clicked in the Windows 95/3.1 driver, the data is
transmitted without specifying Access Code or Lock Job. It is not the
cancellation of data transmission.
• When Access Code is used, printing may not be effected unless the access
number has been correctly set. It is possible, by using the utility that comes
with the NIC Board (option), to check on the personal computer screen to see
whether the job has been canceled or not.
Displaying the "Security" Dialog Box
<Windows 95>
The dialog box appears when the [OK] key is clicked on the "Printer" dialog
box if "Access Code" or "Lock Job" has been selected.
<Windows NT 4.0/NT 3.51>
The dialog box appears immediately after "Access Code" or "Lock Job" has
been selected.
<Windows 3.1>
The dialog box appears when "Print" of "File" is selected if Access Code or
Lock Job has been selected.
4608P019CC
(1)
(2)
win.book Page 13 Wednesday, January 26, 2000 11:31 AM