Hitachi Koki USA Hi-35pc - Manual (Page 158)

1. Troubleshooting
5-6
Ch
a
p
te
r 5
T
roub
le
sh
oot
in
g
Symptom Possible Cause Action
Unable to staple
properly. No stapling can be
effected if the type of
paper is thick paper or
OHP transparencies. Check the type of paper.
No stapling can be
effected if the number of
prints to be made exceeds
50 or the original
document contains pages
of different sizes. Check the number of prints to
be made.
Unable to specify
Hole Punch. Either a Finisher or
Mailbin Finisher must be
mounted to enable setting
Hole Punch. Hole Punch
can be specified only if
Finisher or Mailbin
Finisher is selected in
Device Option. Select Finisher or Mailbin
Finisher in Device Option.
Hole Punch cannot be
specified if Booklet or
OHP Interleaving is
specified. Check the setting of Booklet
and OHP Interleaving.
Unable to effect Hole
Punch. No holes can be made if
the type of paper is thick
paper or OHP
transparencies. Check the type of paper.
Prints can at times be fed
out without being punched
if the direction of the
paper loaded in the paper
source is not appropriate. Check the direction of the
paper.
Unable to print image
properly. Machine memory space
available is not sufficient. Add the machine memory to
expand its space or simplify
the image to reduce the
amount of data handled.
Unable to specify the
exit port No exit port can be
specified if the paper size
is A6 or B6, or OHP
Interleaving is specified. Check the setting of the paper
size and OHP Interleaving.
win.book Page 6 Wednesday, January 26, 2000 11:31 AM