Hand Held Products 5700 - Manual (Page 44)

3–2 SCANTEAM 5700 User’s Guide
On ✱
Off
Marker Beam Selection
✱
Enable Disable
AutoTrigger Selection
[
[ This programming feature is available only if you have purchased scanner
models 5700/A–1X (refer to Sales Configuration Worksheet).
When enabled, the scanner shows a marker or locator beam before the red scan
line opens across a bar code and the scanning process begins. The marker
beam, emitted by centering the optical scan mirror, appears as a bright spot of
illumination that serves as an aiming guide when bar code targets are at a
distance from the scanner. Note: Applies only to the 5700ALR product.
When enabled, this programming selection allows auto-triggering with the
optional Scan Stand. The Scan Stand provides hands-free operation in any
application where a great number of bar code entries is required. Note:
Does not apply to the 5700ALR product.
Note:
The scanner must be ordered with the AutoTrigger configuration.