Hand Held Products 5700 - Manual (Page 80)

7–4 SCANTEAM 5700 User’s Guide
Wand Emulation
5700–X1, 5700–X2
Conventional wand data format is provided at the modular connector in the
scanner handle.
Signal Function
Interface cables normally supplied with scanner model 5700–X1 and 5700–X2
are terminated with an 10 pin modular plug (P1) and a 9 pin Type D
(Squeeze–to–release) connector (P2) that is compatible with all Welch Allyn
terminals. See chart below.
4
3
6
7
2 8
7
4
2
P2 P1
9 Pin Type D Female 10 Pin Modular Plug
Pin 1
Pin 10
6 9
1 5
Ground
Prog 1
Barcode
+5VDC
Braid
Supply Ground
Tied to 5 Volt Power
Bar Code Data Output
5 Volt Power Connection
Cord Shield
P1 P2
View A–A
P2 connects to
your terminal.
P1 connects to the
scanner handle.