Hand Held Products 5700 - Manual (Page 79)

7–3 SCANTEAM 5700 User’s Guide
Laser Output only
5700–X4
(Laser Compatible Bar Image +12VDC Input*)
Conventional laser data format is provided at the modular connector in the
scanner handle.
Signal Function
Interface cables normally supplied with scanner model 5700–X0 are terminated
with an 10 pin modular plug (P1) and a 9 pin Type D (Squeeze–to–release)
connector (P2) that is compatible with all Welch Allyn terminals. See chart below.
1
3
4
5
6
8
9 1
3
7
8
5
6
9
2
P2 P1
9 Pin Type D Female 10 Pin Modular Plug
Pin 1
Pin 10
6 9
1 5
N/C
Enable
Ground
Good Read
Data
Trigger
SOS
Power Connection
Laser Enable
Supply Ground
Turn on Good Read LED or Beeper
Digital Bar Code Data Output
Trigger Signal to Decoder
Start of Scan
+12VDC
P1 P2
View A–A
P2 connects to
your terminal.
P1 connects to the
scanner handle.
* Note: Cable supports decoders which supply +12V on pin 9 ONLY.
10
VCC (Connected for AutoTrigger**)
** Note: Reference the Cable Matrix for correct AutoTrigger cable.