Hand Held Products 5700 - Manual (Page 49)

3–7 SCANTEAM 5700 User’s Guide
Keyboard Style Selections
This programming selection allows you to program special keyboard features,
such as Caps Lock and Shift Lock.
Regular is used when you normally have the Caps Lock key off.
Caps Lock is used when you normally have the Caps Lock key on.
Shift Lock is used when you normally have the Shift Lock key on. (Not common
to U.S. keyboards.)
Automatic Caps Lock is used if you change the Caps Lock key on and off. The
software tracks and reflects if you have Caps Lock on or off (AT and PS/2 only).
This selection can only be used with systems that have an LED which notes the
Caps Lock status.
Emulate External Keyboard should be scanned if you do not have an external
keyboard (IBM AT or equivalent).
Keyboard Style Selections
✱
Regular
Automatic Caps Lock
Shift Lock Emulate External Keyboard
Caps Lock
Note: The Keyboard Style programming bar codes below apply to the
SCANTEAM 5700 software revision level 2.0 or greater.