HP PROCURVE 2610 - Manual (Page 34)

2-10
Installing the Switch
Installation Procedures
In
sta
llin
g
th
e
Sw
itc
h
Rack Mounting the 2610-PWR switches
1. Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 8-mm M4 screws.
Figure 2-4. Attaching large mounting brackets
W A R N I N G For safe reliable installation, only use the screws provided in the
accessory kit to attach the mounting brackets to the switch.
N o t e The mounting brackets have multiple mounting holes and can be rotated
allowing for a wide variety of mounting options. These include mounting the
switch so that its front face is flush with the face of the rack, or mounting it
in a more balanced position as shown in the illustration above.