FUJITSU MB91460 SERIES - Manual (Page 50)

SK-91F467-FLEXRAY V1.1
Getting Started
FMEMCU-UG-910017-11 - 50 - © Fujitsu Microelectronics Europe GmbH
Figure 5-4: Open Softune Workbench Linker mapping file
Check linker mapping list in the*.mp1 file by right-click on “my_application.abs”,
Open List File, *.mp1.
Figure 5-5: Softune Workbench Linker Mapping
Note:
Always check the memory map of the linker settings and ensure
that this memory map is suitable for the application and target
system in use. Additionally the *.mp1 file should be checked to
ensure correct settings..