FUJITSU MB91460 SERIES - Manual (Page 9)

SK-91F467-FLEXRAY V1.1
Introduction
© Fujitsu Microelectronics Europe GmbH - 9 - FMEMCU-UG-910017-11
1.3 General Description
The SK-91F467-FLEXRAY supports the FUJITSU 32-bit Flash microcontroller MB91F467D
and the FUJITSU FlexRay stand alone communication controller MB88121.
The Starter Kit can be used as a stand-alone development platform, or if a MCU socket is
soldered instead of the Flash MCU MB91F467D, with the emulation system MB91V460
adapter board (MB2198-300) and 208 pin probe cable board (PB-91467D-NLS-208PFV).
This User Guide is describing PCB version V1.1. The PCB version is printed at the TOP side
of the starter kit close to MB91F467D MCU [U1].