FUJITSU MB91460 SERIES - Manual (Page 59)

SK-91F467-FLEXRAY V1.1
Getting Started
© Fujitsu Microelectronics Europe GmbH - 59 - FMEMCU-UG-910017-11
5.5 Memory Configuration for User Applications
Valid load module files can only be achieved if the language tool configuration is appropriate.
The most convenient way to create owns a project is to copy the provided Template-Projects
from the example-directory and use it as “blank sheet”.
If the Softune Monitor debugger is being used the following memory areas are reserved by
the monitor debugger and must not be used by the application.
Memory Map of Softune Workbench Monitor debugger
91460_mondeb_uart4-v11
Memory Type Used for Area(s) Sections
Internal CPU Data
RAM
Stack, Data 0x28000 - 0x28FFF
STACK, DATA
Debug Kernel
0x000F:0000-
0x000F:FFFF
CODE, CONST
Internal Flash
Memory of
MB91F467DA series
Vector Table
0x0F:FC00-
0x0F:FFFF
INTVECT
Note:
Be aware that the memory map may depend on the debugger version and any
modifications of the debugger made by the user.
Table 5-1: Memory map of Monitor debugger 91460_mondeb_uart4-v11
Note:
The following chip select areas are used by the Softune monitor
debugger and must not be used or overlap with other chip select
areas:
CS1 – SRAM 0x0080.0000 - 0x009F.FFFF