FARGO electronic Card Printer - Manual (Page 20)

Section 3: Getting Started 15
4250/4225 Card Printer UserÕs Manual
2. Place the DC power plug end of the power supply cord into the printerÕs
Power Input Port.
3. Place the AC power plug end of the power supply cord into an available wall
outlet.
Power is automatically applied to the printer when it is plugged in. Press the
On/Cancel button if you wish to turn the printer OFF. If the printer will not be
used for a long period of time, unplug the power supply cord from the wall outlet.
E. IDENTIFYING THE PARTS
This illustration shows all of the features found on the front of the printer.
Power Input
Port
LCD Display Top Cover
On LED Light
Ready LED Light
Cover Release
Button
Card Hopper Door
Pause/Resume Button
On/Cancel Button
510291_card printer 11/24/98 12:18 PM Page 15