Technical specifications – FARGO electronic Card Printer User Manual
Page 76
Section 10: Technical Specifications 71
Technical
Specifications
Printing Methods:
4250:
Dye-sublimation/resin thermal transfer
4225:
Resin thermal transfer
Printing Resolution:
300 dpi (11.8 dots/mm)
Colors:
4250:
Up to 16.7 million
4225:
Up to 256 shades of gray
Print Speed:
4250:
Approximately 6 seconds (K)
Approximately 35 seconds (YMCKO)
4225:
Approximately 6 seconds (K)
Maximum Print Width:
2.24Ó (56.8 mm); edge-to-edge printing is available on standard
CR-80, .030Ó (.76mm) cards only
Maximum Print Length:
3.37Ó (85.5mm)
Accepted Card Width:
2.1Ó to 2.63Ó W (53mm to 67mmW)
Accepted Card Length:
3.25Ó to 3.88Ó L (82mm to 98mmL)
Accepted Card Thickness:
.010Ó to .060Ó (.254mm to .75mm);
Card Types:
PVC or Polyester cards with polished PVC finish; monochrome
resin ribbon required for straight polyester cards
Card Capacity:
Accepts up to 100 standard CR-80 PVC Cards
Software Driver:
Windows 3.1x, Window 95/98, Windows NT, and Macintosh
Interface:
Standard 8-bit Centronics-type parallel (ECP compatible) or
Macintosh serial
Operating Temperature:
65¼F to 80¼F (18¼C to 27¼C)
Humidity:
Non-condensing 20%Ð60%
Dimensions:
8.4Ó H x 13.6Ó W x 12.7Ó D
(213mmH x 345mmW x 323mmD)
10
510291_card printer 11/24/98 12:19 PM Page 71