FARGO electronic PERSONA C10 - Manual (Page 58)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
58
Selecting from the Color Matching options
Use this option to control where the resin black (K) panel of a full-color ribbon is printed.
When printing with a resin-only ribbon type or a ribbon type that does not have a K panel, all
K Panel Resin options will be grayed out. (Note: Resin black text is desirable due to its
sharp, saturated black coloring and resin black bar codes are often required to ensure
readability when scanned.)
Step Procedure
1 Select None for print speed versus print color or for use of third party color
matching software.
OR
Select Algebraic to control the Contrast and Gamma of the printed image, as
well as the individual color balance of Yellow, Magenta and Cyan. (Note: In
most cases, the default settings of these options will suffice. When the
Algebraic color matching option is selected, all control options will display
and can be adjusted.)
OR
Select FargoColor to make appropriate adjustments.