FARGO electronic PERSONA C10 - Manual (Page 71)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
71
Using the Magnetic Encoding Mode option
Use the Magnetic Encoding Mode option to specify the desired, Magnetic Encoding
standard.
Step Procedure
1 Select the ISO option provides encoding capability for either high or low-
coercivity cards on Tracks 1, 2 and 3. (Note: The ISO option is the industry's
most standard mode of Magnetic Encoding.)
OR
Select the JIS II mode provides encoding compatibility with the JIS C 6220
Type II cards commonly used in Japan. When the JIS II mode is selected, only
Track 2 will be encoded. (Note: No encoding customization options are
available with the JIS II mode.)