FARGO electronic PERSONA C10 - Manual (Page 124)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
124
Replacing the Cleaning Roller Assembly (830177)
Refer To Drawing 830177.
TTR: 1 minute.
Step Procedure
1 Unplug the power cord from the printer.
2 Lift the Head Latch Lever (830312, drawing 830119-XX) and raise the Upper
Imaging Assembly.
3 Locate the Cleaning Roller Assembly in the Card Feed Path beneath the
Lower Ribbon Sensor Assembly (drawing 830126). The Cleaning Roller
Assembly is held in place by two magnetic catches (130200, drawing 830131).
4 Grasp the front corner of the Cleaning Roller Assembly and lift it from the
printer.