FARGO electronic PERSONA C10 - Manual (Page 14)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
14
Printer Components: Ribbons and Cards
Please note that the Printer requires specialized Ribbons in order to function properly. To
order additional Ribbons, contact the authorized reseller.
Caution: Watches, rings, bracelets and other jewelry can damage the Printhead if
accidentally bumped against it. For best results, remove such items before installing or
removing Ribbons.
The Card Printer has the following Ribbon types available for printing:
Term Description
Standard Resin
Black (K) Ribbon Standard Resin Black (K) Ribbon with no clear overlay panel
(produces 1,000 prints)
Colored Resin
Ribbons A variety of Colored Resin Ribbons with no clear overlay panel
(produce 1,000 prints)
Premium Resin
Black (K) Ribbon Premium Resin Black (K) Ribbon with no clear overlay panel
(produces 1,000 prints)
Metallic Resin
Ribbons Metallic Resin Ribbons with no clear overlay panel (produces 1,000
prints)
Scratch-off Resin
Ribbon Scratch-off Resin Ribbon with no clear overlay panel (produces
1,000 prints)
Dye-Sublimation
Black (BO) Ribbon Dye-Sublimation Black (BO) Ribbon with a clear overlay panel
(produces 500 prints)
Full-Color
(YMCBO) Ribbon Full-Color (YMCBO) Ribbon with a dye-sublimation black panel and
a clear overlay panel (produces 250 prints)
Full-Color
(YMCKO) Ribbon Full-Color (YMCKO) Ribbon with a resin black panel and a clear
overlay panel (produces 250 prints)