FARGO electronic PERSONA C10 - Manual (Page 17)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
17
Introduction
Thank you for choosing the color Card Printer. This fast, compact Printer has been designed
to print high-quality, full-color cards from virtually any Windows® application program. It
offers many features which easily allow you to create durable cards complete with high
resolution photos, graphics, text, bar codes and more.
To begin using the Printer, please refer to the remainder of this manual. This user’s manual
is the complete step-by-step guide to efficiently setting up and printing with the new Card
Printer.
Choosing a Good Location
• Place unit in a location with adequate air circulation to prevent internal heat build up.
• Do not place unit near heat sources such as radiators or air ducts or in a place subject to
direct sun-light, excessive dust, mechanical vibration or shock.
• Allow for adequate clearance above the unit to accommodate the height of the unit with
its Top Cover and Printhead Assembly open.
About Moisture Condensation
If the unit is brought directly from a cold to a warm location or is placed in a very damp room,
moisture may condense inside the unit. Should this occur, print quality may not be optimum.
Leave the unit turned OFF in a warm, dry room for several hours before using. (Note: This
will allow the moisture to evaporate.)
Unpacking and Inspection
While unpacking the Card Printer, inspect the carton to ensure that no damage occurred
during shipping. Also, make sure the following items are included:
• Printer
• Power Transformer
• Attachable Card Output Hopper
• Software Installation CD
• Warranty Statement and Registration Card