FARGO electronic PERSONA C10 - Manual (Page 24)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
24
Installing the 32-Bit Print Spooler for Windows 95/98 (continued)
When the 32-Bit Print Spooler is running, its icon will appear in the Windows Task Bar.
During a print job, it is sometimes helpful to click on this icon to bring the 32-Bit Print Spooler
status window to the foreground of the application. This window provides a number of details
about the print jobs being sent to the Printer.
Term Description
Current Job
tab The Current Job tab tells you the name and size of the file printing, the
progress of the overall print job, as well as the total number of copies
left to print.
It also provides buttons which allow you to pause or cancel the print job
at any time during the printing process.
Settings tab The Settings tab tells you the port and Printer to which you are printing
and allows you to configure the timeout settings. In most instances,
these settings will rarely need to be changed.
This tab also provides two other options called Save last job for
reprint and Direct to Port Mode.
Save last job
for reprint
option When the Save last job for reprint option is selected, the 32-Bit Print
Spooler will automatically save the last print job you sent to the Printer
and allow you to instantly reprint the job without the delay of having to
reprocess it.
The print job will be saved in the spooler until another print job is sent
and saved over it. If you do not wish to save the last print job for reprint,
deselect this option.
To print a saved job, simply select the Print button from the spooler’s
Current Job tab.
Direct to Port
Mode option The Direct to Port Mode option is selected by default. In most
instances, this option allows the spooler to send data to the Printer at
its optimum speed. If, however, you experience problems when printing
with this option selected, simply deselect it and try the print job again.
Job Queue tab The Job Queue tab appears only when a print job is being sent to the
Printer. This tab tells you the name and status of each job in the queue
and shows you the order in which the jobs will print if you have sent
multiple jobs to the Printer. A control button is also provided which
allows you to delete every job listed in the queue.
To delete the job currently being printed, simply select the Cancel Print
button under the Current Job tab.