Loading cards into the printer – FARGO electronic PERSONA C10 User Manual
Page 31
RESTRICTED USE ONLY
Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
31
Loading Cards into the Printer
The Card Printer prints onto standard CR-80 size cards (3.375L x 2.125W x .030 / 86mmL x
54mmW x .75mm), which have a clean, level, polished PVC surface.
•
Although the Printer is equipped with card cleaning Rollers, it is very important to always
print onto cards designed for direct-to-card, thermal printing. (Note: For this reason, a
special card stock is available which is specifically designed for printing with the Printer.)
•
This card stock provides a level, polished PVC surface free of fingerprints, dust and any
other types of embedded contaminants.
•
In addition, this card stock is packaged and shipped in dust-free plastic bags. To order
compatible card stock, contact the authorized reseller.
Caution: Never run cards with a contaminated, dull or uneven surface through the
Printer. Printing onto such cards will ultimately lead to poor print quality and will greatly
reduce the life of the Printhead. In addition, always store the card stock in its original
packaging or in a clean, dust-free environment. Do not print onto cards which have been
dropped or soiled. Printheads damaged by contaminated or poor quality cards will
automatically void the Printhead’s factory warranty.