FARGO electronic PERSONA C10 - Manual (Page 52)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
52
Selecting Paper/Output
Selecting Card Size
This option displays a list of the available card size selections. These selections prevent you
from printing over or damaging the area of the card containing the magnetic stripe, IC chip or
punched slot. Select the card size option that’s appropriate for the type of card you are using.
Step Description
1 The Std CR-80 selection allows you to print and overlay the entire printable area
of a standard CR-80 size card.
The Smart Card, Magstripe and Punch Offset selections allow you to print and
overlay only within the given card areas.
The Smart Chip selection allows you to print and overlay anywhere on a card
except over the immediate location of a standard smart card chip or signature
panel.