Selecting from the ribbon type options – FARGO electronic PERSONA C10 User Manual
Page 56
RESTRICTED USE ONLY
Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
56
Selecting from the Ribbon Type options
Use the Ribbon Type dropdown menu to select the correct ribbon type.
Step Procedure
1
Select Ribbon Type under Document options to change the setting.
2
Select the correct Print Ribbon Type, as shown below. Adjust to match the
Ribbon Type selection with the Ribbon Type already loaded in the Printer.
•
K - Standard Resin Black
•
Colored Resin: Colored Resin is available in Red, Blue, Green, or White
•
K - Premium Resin Black
•
Metallic Resin: Metallic Resin is available in Gold or Silver
•
Scratch-Off Resin
•
BO: Dye Sub Black, Overlay
•
YMCBO - Full Color/Dye-Sub Black/Overlay
•
YMCKO - Full Color/Resin Black/Overly
•
YMCKOK – Full Color/2 Resin Black/Overlay