FARGO electronic PERSONA C10 - Manual (Page 64)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
64
Selecting the K Panel Graphics Mode option
Use this option to control where the resin black (K) panel of a full-color ribbon is printed.
Step Procedure
1 Select the K Panel Graphics Mode option to control where the resin black (K)
panel of a full-color ribbon is printed. (Note: If printing with a resin-only ribbon
type or a ribbon type that does not have a K panel, all K Panel Resin options will
be grayed out. Resin black text is desirable due to its sharp, saturated black
coloring and resin black bar codes are often required to ensure readability when
scanned.)