Selecting the track lrc generation option – FARGO electronic PERSONA C10 User Manual
Page 74
Advertising
RESTRICTED USE ONLY
Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
74
Selecting the Track LRC Generation option
Use this option to customize the LRC Generation Mode (used to encode the magnetic data
on the currently selected Track). (Note: The default ISO Standard selections for this option
are Track 1: EVEN, Track 2: EVEN and Track 3: EVEN.)
Step Procedure
1
Select NO LRC to change the LRC Generation to none.
OR
Select Even Parity to change the LRC Generation to Even Parity.
OR
Select Odd Parity to change the LRC Generation to Odd Parity.
Advertising
This manual is related to the following products: