FARGO electronic PERSONA C10 - Manual (Page 75)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
75
Selecting the Track Character Size option
Use this option to customize the Character Data Size (Bits per Character) used to encode
the magnetic data on the currently selected Track. (Note: This character size includes the
parity bit, if enabled.) (Note: The default ISO Standard selections for this option are Track
1: 7 BPC, Track 2: 5 BPC and Track 3: 5 BPC.)
Step Procedure
1 Select 5 Bits to change the bits per character to 5 BPC.
OR
Select 7 BPI to change the bits per character to 7 BPC.
OR
Select 8 BPI to change the bits per character to 8 BPC.