FLO TV PTV350 - Manual (Page 18)

Basics
FLO TV Confidential and Proprietary 18 May contain U.S. and international export controlled information
3.7 Audio-only mode
Audio-only mode turns off the display and allows you to continue listening to audio. Start by
viewing a television and then double-press the Sleep/Power button to enter audio-only mode.
The touch screen is locked when the device is in audio-only mode. Losing and reacquiring the
signal does not cancel audio-only mode.
To turn on the display again without disrupting the audio, briefly press the Standby/Power button.
3.8 Auto timeout
To preserve battery life, your FLO TV™ Personal Television is set to turn off the screen if no
video is playing and the device has been idle for 60 seconds.
When your device auto times out, the screen is off and unlocked, but the device and audio remain
on. Simply touch the touch screen or touch any button to activate the device. After 5 minutes in
the auto timeout state, the device automatically goes into Sleep mode and requires pressing the
Sleep button to wakeup.
If the device is connected to an external power source, auto timeout does not occur.
NOTE: Notifications automatically turn on the display.