FUJITSU MCM3064AP - Manual (Page 132)

Host Interface
4-62 C156-E227-01EN
- 05h for PROM media
- 03h for other media and in Not Ready state
The Write Protect (WP) bit indicates the state of the cartridge write protect key.
When this bit is 1, the medium is write-protected.
Mode Data Length indicates the byte length of the mode data to be transferred
successively.
Block Descriptor Length indicates the byte length of the block descriptor to
transfer.
Table 4.74 lists the block descriptor.
Table 4.75 lists the page descriptor.
Table 4.74 Page Descriptor
Bit
Byte
7 6 5 4 3 2 1 0
0 PS 0 Page Code
1 Page Length (n-1)
2-n Mode Parameters
When PS is 1, saving to a flash ROM is possible. For details on Mode Parameter,
see the section on the Mode Select command.