Fortress Technologies ecure Wireless Access Bridge - Manual (Page 17)

Fortress Wireless Access Bridge: Installation
7
2.1.2 Compatibility
The Fortress Bridge is fully compatible with Fortress Secure
Client versions 2.4 and higher.
2.2 Preparation
2.2.1 Shipped and Optional Parts
Included in each Fortress Bridge shipment are:
‹ Fortress Secure Wireless Access Bridge, comprising:
™ one eight-port Ethernet LAN switch
™ one PoE Ethernet WAN port
™ two USB ports
™ one 802.11 a/b/g multi-mode radio
™ one 802.11a radio
™ two lightning arrestor modules
‹ one universal AC-to-48V DC power adapter
‹ AC power cord
‹ one EBU-101-01 PoE adapter
1
‹ one RJ-45-to-DB9 adapter
(for use with a standard, straight-through CAT5 assembly)
‹ ES520 Weatherizing Kit, including:
™ one front-panel cover plate
™ one RJ-45 connector boot assembly (six pieces)
™ one antenna port cap
‹ ES520 Mast-Mounting Kit, including:
™ one mast mounting bracket
™ two 4" long, fully threaded 1/4-20 hex bolts
™ two 1/4" split lock washers
Optionally, you can purchase from Fortress Technologies:
‹ 5.x GHz 9dBi omnidirectional antenna with an N-type male
direct connector
‹ 2.4–2.485 GHz 9dBi omnidirectional antenna with an
integrated 2' antenna cable terminating in an N-type male
connector
‹ 802.11a/b/g 2/2dBi tri-band rubber duck antenna with an
RP-TNC connector and RP-TNC-to-N-type male connector
adapter
The availability and specifications of antennas offered for
purchase from Fortress Technologies are subject to change.
Contact your Fortress representative for details and pricing.
1. In outdoor installations, it is mandatory that the Bridge be powered with the
EBU-101-01 PoE adapter (or equivalent).