Operation and maintenance, Technical service, Replacement parts – FMI (V)B42LI User Manual
Page 15
www.fmiproducts.com
109036-01M
15
Figure 24 - Damper Handle Location
OPERATION AND MAINTENANCE
Continued
DAMPER HANDLE OPERATION
Damper handle, which opens and closes
damper blade, is located inside firebox at
center towards back wall (see Figure 24).
Pushing handle back into keyway slot will
free damper blade to automatically open.
To close, push handle back into keyhole slot
then pull down and forward to lock it in place
(see Figure 25).
WARNING: Risk of fire! Re-
place grate with FMI PRODUCTS,
LLC model 107001-02 only. This
grate has been designed to keep
the operation of your fireplace
safe and efficient.
Damper
Handle
1
2
3
1
2
3
Damper
Weight
To Close Damper
To Open Damper
Figure 25 - Damper Rod
TECHNICAL SERVICE
You may have further questions about in-
stallation, operation, or troubleshooting.
If so, contact FMI PRODUCTS, LLC at
1-866-328-4537. When calling please have
your model and serial numbers of your heater
ready.
You can also visit our web site at
www.fmiproducts.com.
REPLACEMENT PARTS
If this product is missing a part or has a
broken component, please do not return it
to the store. Call FMI PRODUCTS, LLC at
1-866-328-4537 to answer questions and
replace parts under warranty.
Note: Use only original replacement parts.
This will protect your warranty coverage for
parts replaced under warranty.
When calling or writing, please have your
model and serial numbers of your fireplace
ready.
Model and serial number information are in the
fireplace's rating plate located in the screen
pocket to the left or right of the face opening.
LOCATING ACCESS COVER PLATE
Sheet metal cover plates located underneath
front hearth refractory may have shifted or moved
out of place while fireplace was in transit. These
cover plates must be kept in the proper location
prior to using the fireplace (See Figure 26).
For further operating guidelines, instruc-
tions and warranty information, please
refer to your homeowner's guide or contact
your authorized dealer.
Figure 26 - Locating Access Cover Plate
Access
Panel