FUJITSU ScanSnap S500 - Manual (Page 107)

3.6 Changing Carrier Sheet Settings
ScanSnap S500 Operator's Guide
89
Basic Scanner Oper
ations
3
[Add custom size] button
You can create up to 10 custom sizes.
When you click the button, the following settings screen appears.
To add custom size documents
1)Click the [Add] button.
2)The following screen appears.
•Enter the document sizes.
You can set within these range:
Width: 50.8 - 216 mm (2 - 8.5 in)
Length: 50.8 - 297 mm (3 - 11.69 in)
•Enter a name you want to display in [Name:].
⇒The entered name is displayed on [Add or Remove Custom sizes].
3)When you complete the settings, click the [OK] button.
4)A new custom document size is created.
Click the [Close] button, and the "Add or Remove custom sizes" screen closes.
To delete custom size documents
1)On the "Add or Remove custom sizes" screen, select the document size you
want to delete, and click the [Delete] button.
2)When the confirmation screen appears, click the [Yes] button.
3)On the [Add or Remove custom sizes] screen, check that the document size is
deleted, and click the [Close] button.