Scanning procedure – FUJITSU ScanSnap S500 User Manual
Page 140
122
<Scanning procedure>
Operation
1. Load the business cards onto the scanner.
•
Load the business cards face down.
•
When you scan two or more business card, set them in piles.
•
Adjust the side guides so that they contact both sides of the business cards. If there is a space
between the business cards and the side guides, place the cards along the left side guide.
2. Press the [SCAN] button
on the scanner.
⇒
Scanning will be started. After the scanning has finished, the "CardMinder" screen is
displayed.
ATTENTION
•
Do not connect or disconnect other USB devices during the scanning
operation.
•
Do not close the paper chute or press the [POWER] button on the scanner
during the scanning operation.
•
Do not switch the user to log in during the scanning operation.
HINT
•
As the default setting, documents are scanned at "Duplex" mode when you
press the [SCAN] button. Using "ScanSnap Manager", you can set the
scanner to scan documents in "Simplex" mode by pressing [SCAN] button.
•
You can also start scanning with the "ScanSnap Manager" icon
on the
task bar.
*For details, refer to "3.4 Changing Scan Settings" (on page 53).
Paper chute
Business card
Side guide
[SCAN] button
S
S