FUJITSU ScanSnap S500 - Manual (Page 45)

2.2 Connecting ScanSnap to your PC
ScanSnap S500 Operator's Guide
27
Connecting ScanSnap
2
HINT
The power supply of this scanner is controlled by performing the following
actions:
• Open/close the paper chute on the scanner.
• Turn on/off the personal computer to which the scanner is connected.
• Press the [POWER] button on the scanner (when the paper chute is opened).
Opening /closing the paper chute controls the scanner’s power. For example,
the scanner will not be turned on even when you have switched on your per-
sonal computer if the paper chute is closed.
Generally, you can simply turn on/off the scanner only by opening/closing the
paper chute when the scanner is connected to your personal computer.