FUJITSU ScanSnap S500 - Manual (Page 25)

2.1 Installing ScanSnap
ScanSnap S500 Operator's Guide
7
Connecting ScanSnap
2
■ RAM
• 128MB or more (recommended: 256MB or more)
■ Free disk space
• ScanSnap Manager 160 Mbytes
• ScanSnap Organizer 200 Mbytes
• CardMinder 140 Mbytes
• Adobe Acrobat 7.0 450 Mbytes
• ABBYY FineReader 130 Mbytes
■ USB 2.0 support
* USB 2.0 driver supplied by Microsoft Corporation is required for the usage of the above.
2. Make sure that ScanSnap is disconnected from your personal computer.
3. Start up your personal computer.
When using Windows 2000 or Windows XP, log on as a user with "Administrator" privi-
leges (computer administrator privileges when using Microsoft Windows XP Home Edition
operation system)
4. Close all currently running programs.
ATTENTION
• ScanSnap may not function if it is connected to the USB ports for the keyboard
or monitor.
• If you are using a commercially available USB hub, use a type equipped with
an AC adapter.
• If you connect the scanner with USB 2.0, it is required that the USB port and
the hub are compliant with USB 2.0. The scanning speed may slow down
when you connect the scanner with USB 1.1. If your computer has the USB
2.0 compatible port, use it.
Refer to the following list for USB 2.0 support.
• If the CPU and the memory do not meet the required specification, the scan-
ning speed will slow down.
Windows 98
Windows 98
(2nd Edition)
Windows Me
Windows
2000
Windows XP
On-board PC
interface 3 3
Expansion
card interfaces 3 3 3