FUJITSU ScanSnap S500 - Manual (Page 181)

7.3 Replacing the Pick Roller
ScanSnap S500 Operator's Guide
163
Replacing Consumab
le
s and Carr
ier Sheet
7
10. Rotate the roller bushing (left) by rotating it in the direction of the arrow.
11. Attach the sheet guide to the scanner.
Pinch the knobs on the sheet guide and attach it to the scanner.
ATTENTION
Make sure that the Pick roller is completely attached. Otherwise, document
jams or other feeding errors may occur.
Pick roller Pick roller shaft Pick roller bushing
Handle
Sheet guide
Craw