FUJITSU ScanSnap S500 - Manual (Page 48)

30
3.1 Flow of Operations
This section describes the flow of operations starting with the scanning of documents on ScanSnap
to the saving of scanned images in PDF format.
■ Preparation
Operation
1. Make sure that the AC cable is connected to the scanner.
2. Make sure that the scanner is correctly connected to your personal computer.
3. Turn on your personal computer.
⇒
The "ScanSnap Manager" icon appears when Windows starts.
4. Open the paper chute.
⇒
The scanner is turned on and the "ScanSnap Manager" icon will change from to .
HINT
You can connect the scanner to your computer after turning it on. When the
scanner is already connected to your personal computer, you do not need to
reconnect it.
HINT
If the scanner is not automatically turned on even when the paper chute is
opened, push the [POWER] button on the scanner.
Paper chute
[POWER] button
S S S S