FUJITSU ScanSnap S500 - Manual (Page 165)

6.2 Cleaning the Scanner Exterior
ScanSnap S500 Operator's Guide
147
Daily Care
6
6.2 Cleaning the Scanner Exterior
Clean the scanner exterior and the ADF paper chute with a cloth moistened with a small amount of
Cleaner F1 or any neutral detergent.
ATTENTION
• Never use paint thinner and other organic solvents.
• During the cleaning, prevent water or moisture from getting inside the scanner.
• Do not use aerosol sprays to clean the scanner. Aerosol sprays cause dirt and
dust to enter the scanner, resulting scanner failure and malfunction.
Cloth
Cleaner F1 or
neutral detergent
Paint thinner